In Stock Now !
Price shown is for : (Wacol Depot only)
Panel 1200 x 2450mm high in Black Satin
Tubes 16mm dia welded at Top & Bottom rail 38x25mm with tube punched through rail @ 72mm apart.
Panels are Powder Coated Aluminium
Panels have been tested and conform to Australian Standards 1926.1-2012 & AS1926.1-2007
A " Form 15"  will be supplied on request.
Limits May Apply

  In Stock Now !

Price shown is for : (From Wacol Depot only)
1 x Aluminium Panel 2450mm Long x 1200mm High
Tubes 16mm dia @ 72mm apart
1 x Post 1800mm long x 50x50mm
4 x Mounting Brackets
1 x Standard Flat Post Cap
12 x Self Tapping Metal Fix Screws
Complies to Australian Standard  AS1926.1-2012  &  AS1926.1-2007
A "Form 15" Supplied on request

In Stock Now !
(From Wacol Depot only)
Flat Top Pool Gate in Black Satin 
Price shown is for Standard Size of gate = 970mm (1000mm opening x 1200mm high) Other sizes optional.
Gate is Powder Coated Aluminium
Gate is fully welded and complies to Australian Standards for pool use.

Raked Step up Panel. Choice of  300mm & 600mm step up.
Panels 1200 wide. To match 1200mm high pool panels. In Black Satin.

In Stock Now !


Pool Fence panel 2400x1500mm high in Black Satin

Tubes 16mm diameter welded at 8 points

Top, Bottom & Centre rail 38x25mm with tube punched through rail

Centre Rail 1200mm from base.

Panels conform to Australian Standards 1926.1-2012 & AS1926.1-2007

Panel is reversible.

A "Form 15"  is available on request.

Pool Fence panel 2400mm x 1800mm high in Black Satin
Tubes 16mm diameter welded at 8 points
Top, Bottom & Centre rail 38x25mm with tube punched through rail Centre Rail 1200mm from base.
Panels are Powder Coated Aluminium in Black Satin
Panels conform to Australian Standards 1926.1-2012 & AS1926.1-2007
Panel is reversible.
A "Form 15" is available on request

4 x Brackets 38x25mm Black Satin

12 x Self Tapping Screws for Standard Metal Fixing

Price shown is for Black Satin 1800mm x 50x50mm includes a standard flat cap, domed cap as per illustration is extra.
Other sizes optional

Price shown is for Black Satin x 1320mm high x 50x50mm includes a standard flat cap, domed cap as per illustration is extra.
Screws/Bolts to secure plate - extra
Other sizes optional

Price shown is for Black Satin x 1320mm high x 50x50mm includes a standard flat cap, domed cap as per illustration is extra.
Other sizes optional
includes:
1 x Standard Flat Cap, Domed Cap Extra
2 x Coach Screws
2 x Wall Plugs
2 x Washers
2 x Cap 25mm Diameter to cover/hide screw holes

Fill Rail 38x25 - 2450mm and 3000mm
To fill in gaps under fence panel to comply to Australian Standards. In Black Satin.

Fasteners to secure Glass Fencing Spigots or Flanged Post base plates to a concrete base includes:
M10x120mm Threaded Rod Kit. Stainless Steel 316 - 4 x pack.
Includes 4 x each , M10x120mm Threaded Rod, M10 T8mm Full Nut, Spring Washer and a Flat Washer.

Premium Stainless Steel Timber Fixing Kit.
Secure post base plates or Spigots to timber decks.
4 x M10x110mm with nuts and washers. Screw in with a 5mm hex driver at end of threaded section to secure.
Timber screw section 70mm long.
Tip: Pre-drill with a 5mm drill bit before screwing into timber.

Soudal - Soudafix CA 1400 (Vinylester) - Chemical anchor 280ml Tube
High performance, two-part anchoring resin to secure anchors to hold down spigots or flanged posts feet.
1 x 280ml Cartridge will be required to fill 24 x holes using 10x120mm Threaded Rod.
1 x 280ml Cartridge will do 24 holes ( 6 x spigots ).
Easy to use and apply           •  Fast cure (20°C = 45min full cure; 30°C = 25min full cure) • Vinylester styrene free • Can be used in damp concrete •

Soudal - Cartridge Gun.
Dripless Trade Quality Heavy Duty Cartridge Gun ( geared ration gun 18:1, suits 300mm Silicon Cartridge and Soudafix 280ml Chemical Anchor Cartridge)